| PART |
Description |
Maker |
| B65539-C1003-X101 B63399-B4 B63399-B5 B65531 B6553 |
In accordance with IEC 60133
|
EPCOS[EPCOS]
|
| 4302.5001 4302.5002 4302.5003 4302.5004 4302.5005 |
IEC Appliance Inlet C14 with Filter, Line Switch 1-pole
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 6A; Terminal Type: Quick Connect Tabs; Non-illuminated; qualified for use in equipment according To IEC/EN 60953 6A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOLDER
|
Schurter Inc.
SCHURTER AG
|
| FTN FTN-1Z FTN-3Z FTN-6ZM FTN-1ZM FTN-3ZM |
Chasis Panel with Fused IEC conector Switch (1-6A)
IEC Connector Filter
|
PREMO CORPORATION S.L
|
| RFFM8250QTR7 RFFM8250QSQ RFFM8250QSB RFFM8250QSR R |
WiFi Switch LNA Module 2.4GHz to 2.5GHz Tested in Accordance with AEC-Q100
|
RF Micro Devices
|
| FTCV FTCV-6Z FTCV-6ZC FTCV-6ZM FTCV-3Z FTCV-3ZC FT |
Chasis Panel with Fused IEC connector Switch Voltage Selector (1-6A)
IEC Connector Filter
IEC Connector Filter
|
PREMO CORPORATION S.L
|
| 4740 4740.3000 4740.3100 4740.3300 4740.3600 4740. |
Distribution Unit with 1 IEC Appliance Inlet C14 or Power Cord, 4, 5 or 6 IEC Appliance Outlets F and Extra Components
|
Schurter Inc.
|
| MKP1841-522-165-V MKP1841-522-165-G MKP1841-547-25 |
Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 金属化聚丙烯薄膜电容器相关文件类型：IEC 60384-16
|
Vishay Intertechnology, Inc.
Vishay Intertechnology,Inc.
VISAY[Vishay Siliconix]
|
| P-1240-00X P-1240-004 P-1240-005 |
IEC & Wallplug Single Phase Filters
IEC & Wallplug Impedance Matching Units
|
PREMO CORPORATION S.L
|
| KPF6.1 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 6A; Terminal Type: Quick Connect PCB; Very efficientGround contact onThe PCB; IEC/EN 60950
|
SCHURTER INC
|
| 4302.5312 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 2A; Terminal Type: Quick Connect Tabs; Non-illuminated; qualified for use in equipment according To IEC/EN 60956 2A, 125VAC, MALE, MAINS POWER CONNECTOR, SOLDER
|
SCHURTER AG
|
| CRIMPFOX-UD-6-4 |
Crimping pliers, square compression, for ferrules 0.25 - 6 mm2 in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09
|
PHOENIX CONTACT
|
